Comparative cancer risk assessment of THMs in drinking water from well water sources and surface water sources

This research evaluates the lifetime cancer risks from trihalomethanes in Tehran's drinking water. The Trihalomethanes were measured in seven different water districts. Sixty-three samples were taken from tap water across the city for 7 months. The samples were analyzed for trihalomethanes using US EPA method 524.2. The average concentration of total trihalomethanes in different districts were between 0.81 and 9.0 μg/L, and the highest concentrations were detected in district 2 at 19.5 μg/L. Total lifetime cancer risks assessment from exposure to trihalomethanes in drinking water (ingestion, inhalation, and skin routes) were performed for people living in different districts in Tehran. The lifetime cancer risk was 7.19 × 10(-5) in district 2 (a more affluent neighborhood) where mostly surface water sources is used to supply drinking water and 9.38 × 10(-6) in district 7 (a less affluent neighborhood) which is mainly supplied with well water sources. Based on the population data, the total expected lifetime cancer cases from exposure to trihalomethanes are 104, 108, 81, 81, 41, 27, and three for districts 1 through 7, respectively. The average lifetime cancer risk was 4.33 × 10(-5) which means a total of 606 lifetime cancer cases for the entire province of Tehran. The highest risk from THMs seems to be from the inhalation route followed by ingestion and dermal contacts.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.     

Stand-alone PV-hydrogen energy system in Taleghan-Iran using HOMER software: optimization and techno-economic analysis

One of the most attractive features of hydrogen as an energy carrier is that it can be produced from water. Hydrogen has the highest energy content per unit mass as compared to chemical fuel and can be substituted. Its burning process is non-polluting, and it can be used in the fuel cells to produce both electricity and useful heat. Photovoltaic arrays can be used in supplying the water electrolysis systems by their energy requirements. During the daylight hours, the sunlight on the photovoltaic array converts into electrical energy which can be used for electrolyzer. The hydrogen produced by the electrolyzer is compressed and stored in hydrogen vessel and provides energy for the fuel cell to meet the load when the solar energy is insufficient. This study investigates a stand-alone power system that consists of PV array as power supply and electrolyzer. They have been integrated and worked at the Taleghan renewable energies’ site in Iran. The National Renewable Energy Laboratory’s Hybrid Optimization Model for Electric Renewables simulation software has been used to carry out the optimal design and techno-economic viability of the energy system. The simulation results demonstrate that energy system is composed of 10-kW PV array, 3.5-kW electrolyzer, 0.4-kW proton exchange membrane fuel cell, 2.5-kW inverter, and 60 batteries (100 Ah and 12 V). The total initial capital cost, net present cost, and cost of electricity produced from this energy system are 193,563 US$, 237,509 US$, and 3.35 US$/kWh, respectively.     

Electrochemical treatment of livestock waste streams. A review

Environmental Chemistry Letters - Wastewater from the livestock industries contains high concentration of nutrients, organic pollutants, suspended solids, and pathogenic microorganisms. Discharge...     

Spatiotemporal analysis of COVID-19, air pollution,climate, and meteorological conditions in a metropolitan region of Iran

The COVID-19 pandemic has a close relationship with local environmental conditions. This study explores the effects of climate characteristics and air pollution on COVID-19 in Isfahan province, Iran. A number of COVID-19 positive cases, main air pollutants, air quality index (AQI), and climatic variables were received from March 1, 2020, to January 19, 2021. Moreover, CO, NO₂, and O₃ tropospheric levels were collected using Sentinel-5P satellite data. The spatial distribution of variables was estimated by the ordinary Kriging and inverse weighted distance (IDW) models. A generalized linear model (GLM) was used to analyze the relationship between environmental variables and COVID-19. The seasonal trend of nitrogen dioxide (NO₂), wind speed, solar energy, and rainfall like COVID-19 was upward in spring and summer. The high and low temperatures increased from April to August. All variables had a spatial autocorrelation and clustered pattern except AQI. Furthermore, COVID-19 showed a significant association with month, climate, solar energy, and NO₂. Suitable policy implications are recommended to be performed for improving people’s healthcare and control of the COVID-19 pandemic. This study could survey the local spread of COVID-19, with consideration of the effect of environmental variables, and provides helpful information to health ministry decisions for mitigating harmful effects of environmental change. By means of the proposed approach, probably the COVID-19 spread can be recognized by knowing the regional climate in major cities. The present study also finds that COVID-19 may have an effect on climatic condition and air pollutants.

     

Multivariate statistics and entropy theory for irrigation water quality and entropy-weighted index development in a subtropical urban river,Bangladesh

Environmental Science and Pollution Research - Currently, a well-developed combination of irrigation water quality index (IWQIs) and entropy water quality index (EWQIs) for surface water appraisal...     

Role of financial development,environmental-related technologies,research and development,energy intensity,natural resource depletion,and temperature in sustainable environment in Canada

Environmental Science and Pollution Research - Environmental sustainability concerns are increasing worldwide; both developing and developed countries face environmental degradation. Literature has...     

Optimization of metal bio-acid leaching from mobile phone printed circuit boards using natural organic acids and H2O2

Journal of Material Cycles and Waste Management - With increased popularity and technological innovation, more and more electric and electronic equipment wastes (e-wastes) are being generated....     

Determining and evaluating the thermodynamic properties of municipal solid waste for different provinces of Iran

Journal of Material Cycles and Waste Management - To study, analyze and select the appropriate method for converting MSW into energy, the thermodynamic properties of the MSW are required including...     

What is an explosion? A case history of an investigation for the insurance industry

After a large property loss, the insured and insurers of a hydroelectric power plant in North America became embroiled in subrogation to determine if the event could be characterized as an explosion. The subject insurance policy provided coverage for explosions, but excluded mechanical breakdowns. Analysis by Exponent Failure Analysis Associates indicated that a consistent, cross-disciplinary definition for explosions can be extracted from published scientific literature, and that this incident was not an explosion because certain key requirements were missing during the accident. However, this investigation has highlighted the necessity for insurance companies and their insureds to better understand this term and thereby minimize future coverage disputes. This paper presents an analysis of this incident and describes the necessary characteristics of an explosion.